POSTEROVÁ SEKCE

Datum: 7.9.2022

10:20 - 11:30
P1
AMBROŽ Ondřej
Institute of Scientific Instruments of the CAS, Brno, Czech Republic, EU
Effects of Etchant Stirring on the Surface Quality of the Metallography Sample - POSTER
10:20 - 11:30
P2
ANTOŠ Jakub
University of West Bohemia, Pilsen, Czech Republic, EU
Aluminium Oxide Grid Blasting: Grid Size and Blasting Pressure Influence on the Substrate Surface Grid Residue, Roughness and Adhesion Strength of Plasma Spray Ceramic Coating - POSTER
10:20 - 11:30
P3
BAŃKOWSKI Damian
Kielce University of Technology, Kielce, Poland, EU
Influence of the Selected EDM Machining Parameters on the Geometrical Structure of the Surface of Alnico Alloys - POSTER
10:20 - 11:30
P4
COUFAL Vladislav
University of West Bohemia, Pilsen, Czech Republic, EU
Comparison of Physical, Mechanical and Chemical Properties of Barrel Steel 32CrMoV10-12 and Nitriding Steel 31CrMoV9 after Nitriding in Gas - POSTER
10:20 - 11:30
P5
DLOUHÁ Žaneta
Research and Testing Institute Plzen Ltd., Pilsen, Czech Republic, EU
Adhesion of Selected Thermally Sprayed Coatings on Additive Manufactured Maraging Steel - POSTER
10:20 - 11:30
P6
DVOŘÁK Jiří
Institute of Physics of Materials of the CAS, Brno, Czech Republic, EU
Creep and Microstructure Stability of Different Purity Aluminium and its Alloys Processed by ECAP Method - POSTER
10:20 - 11:30
P7
HRADIL David
COMTES FHT a.s., Dobřany, Czech Republic, EU
Carburizing with Subsequent Laser Surface Hardening of H13 Die Steel - POSTER
10:20 - 11:30
P8
HRADIL David
COMTES FHT a.s., Dobřany, Czech Republic, EU
Permanent Direct Part Marking for Metal Parts Processed at High Temperature - POSTER
10:20 - 11:30
P9
CHOCHOLOUŠEK Michal
Research Centre Rez, Husinec, Czech Republic, EU
Material Properties of Nickel Based Cold Spray by Means of Small Specimens - POSTER
10:20 - 11:30
P10
JANDA Tomáš
University of West Bohemia, Pilsen, Czech Republic, EU
Effect of Tool Temperature and Dwell Time in the Tool for Press Hardening on the Mechanical Properties of Modern High-Strength Steel with 3% Mn - POSTER
10:20 - 11:30
P11
KASL Josef
Research and Testing Institute Plzen Ltd., Pilsen, Czech Republic, EU
Failure Analysis of a Cracked Tram Axle - POSTER
10:20 - 11:30
P12
KOLLÁR Peter
Pavol Jozef Šafárik University in Košice, Košice, Slovakia, EU
Impact of NiFeMo Particle Powder Smoothing at Powder Metallurgy Preparation Process on Magnetic Properties of Resulting Compacts - POSTER
10:20 - 11:30
P13
KOPELENT Michal
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Effect of Thermal Treatment and Strain Rate on Superelastic and Mechanical Properties of NiTi Sheet - POSTER
10:20 - 11:30
P14
KOUKOLÍKOVÁ Martina
COMTES FHT a.s., Dobřany, Czech Republic, EU
Functionally Graded Materials and their Properties in the Context of the Directed Energy Deposition Parameters - POSTER
10:20 - 11:30
P15
MŁYNARCZYK Piotr
Kielce University of Technology, Kielce, Poland, EU
Accuracy of Shaping Spherical Surfaces by Means of EDM Processing - POSTER
10:20 - 11:30
P16
OLEKŠÁKOVÁ Denisa
Technical University of Košice, Prešov, Slovakia, EU
Additive Technologies in the Preparation of Compacted Powder and Composite Magnetic Materials - POSTER
10:20 - 11:30
P17
SALVETR Pavel
COMTES FHT a.s., Dobřany, Czech Republic, EU
Influence of Alloying Elements and Heat Treatment on Properties of SiCr Spring Steel - POSTER
10:20 - 11:30
P18
SZKANDERA Pavel
VSB - Technical University of Ostrava, Ostrava, Czech Republic, EU
Increasing the Efficiency of the Forming Process by the DRECE Method - POSTER
10:20 - 11:30
P19
ZÁLABSKÝ Jan
University of West Bohemia, RTI, Pilsen, Czech Republic, EU
3D Manufactured Maraging Steel and Its Heat Treatment - POSTER
10:20 - 11:30
P20
CHMIELARZ Krzysztof
Warsaw University of Technology, Warsaw, Poland, EU
The Microstructure and Properties of Ovako 677L Steel after Innovative BQT Treatment - POSTER
19:00 - 19:30
ANNOUNCEMENT OF THE BEST POSTER CONTEST

Zpět