SEKCE D - ZPRACOVÁNÍ, MIKROSTRUKTURA A ZKOUŠKY - PROCESSING, MICROSTRUCTURE & TESTING
Datum: 9.9.2026
This presentation highlights the latest product innovations from Gatan and EDAX for applications in scanning electron microscopy (SEM). It will focus on advanced analytical solutions, including next-generation windowless EDS detector that enable improved detection and quantification of light elements, the innovative Spherical Indexing approach for EBSD, which expands the capabilities of automated phase identification and crystallographic characterization, and state-of-the-art cathodoluminescence (CL) system that provide valuable insights into the optical and electronic properties of materials. The presentation will discuss the technological benefits of these developments, showcase practical application examples.
With the development of additive manufacturing (AM) technology, scientists noticed that both the high cooling rate and the little-scale molten pool properties in this technology might be the way to fabricate Bulk Metallic Glasses (BMGs). By well controlling the parameters according to the energy density equation, molten pool in Laser Powder Bed Fusion (LPBF) process can be stacked together, forming the final products. Although LPBF has such excellent characteristics for manufacturing BMGs theoretically, two major issues still exist. First, the densification of printing objects will be affected by the related parameters. Specifically, the laser power (P), scanning speed (v), hatch distance (h), and layer thickness (t), all these four parameters comprise the energy density, which will determine the behavior of the molten pool. Hence, finding the optimized parameters to get the most appropriate arrangements of the molten pool inside the specimen is the most important factor for densification. Second, the Heat Affected Zone (HAZ), caused by the heat transfer around the molten pool, would reheat the printed amorphous alloy and cross Tg, resulting in crystallization.To address these challenges, this study introduces a repetitive scanning strategy. In the initial scan, a lower energy input partially melts the metal powders, creating a porous structure that enhances heat dissipation and mitigates the impact of the HAZ. A subsequent scan with higher laser energy then fully melts the porous structure, ensuring densification while minimizing crystallization risks.
Microstructural analysis revealed that the two scanning strategies produced distinct phase separation morphologies. Furthermore, nano-indentation testing demonstrated that these variations in scanning strategy led to differences in micro-mechanical properties across different regions within each molten pool. In conclusion, this research focuses on comparing the effects of single-pass and repetitive scanning strategies on microstructural evolution and micro-mechanical performance, providing insights into optimizing LPBF parameters for BMG fabrication.
The tensile and creep behavior at elevated temperatures (150-210 °C) of AlSi7Mg0.6 alloy prepared by 3D printing using laser-powder bed fusion (L-PBF) and conventional methods (sand casting, hot rolling) was investigated in non-heat-treated states. The L-PBF samples were printed as cylinders (diameter 11 mm, length 72 mm) without support elements directly onto the substrate in vertical direction. The printing strategy was Stripes and two batches with different layer thicknesses 30 and 60 µm were prepared. The 30 µm printing strategy showed superior tensile and creep resistance to the 60 µm. The rolling improved the tensile strength and creep performance compared to casting, but is still underperforming the properties of the printed alloy. The creep rupture strains are also significantly higher for the printed alloy (10-15% for 30 µm and 12-20 % for 60 µm) compared with the cast alloy (2-5%) and hot rolled alloy (5-9%). The fractographic analysis shows ductile fracture with dimples for the printed and hot-rolled versions of the alloy, while the cast version has brittle facets and large pores containing dendrites (due to free surface of the casting defects).
The pneumatic drive bending fatigue test using a small disk-type specimen (8 mm in diameter, 0.3 mm in thickness) has been recently developed by the authors’ group. The stable air pressure can be alternately applied to both surfaces of small disk specimen at the frequency of 2 Hz at temperatures as high as 180°C. In this study, fatigue test was carried out at a variety of applied pressures of 0.3-0.7 MPa at 25-60°C using epoxy resin. In the previous study, the fatigue life decreased by attaching strain gauge to the specimen, because crack was preferentially initiated in the vicinity of the strain gauge. Therefore, an attempt was made to measure strain distribution by the digital image correlation (DIC) method in this study. When fatigue life was examined in relation to the applied pressure, only minor differences were observed between 25°C and 40°C; however, it decreased significantly above 45°C. Correlating fatigue life with the strain range revealed a single, temperature-independent relationship, with fatigue life decreasing monotonically as the strain range decreased.
Porous titanium structures produced by direct ink writing (DIW) have emerged as promising biomaterials for bone repair due to their ability to combine controlled macro- and microporosity with patient-specific geometries. In this work the influence of pore architecture and filament densification on fatigue behavior was investigated, revealing that crack initiation and propagation are strongly influenced by the hierarchical porous structure and the degree of strut densification, providing critical design criteria for load-bearing implants. To improve processing efficiency, pressure-less spark plasma sintering was evaluated as an alternative consolidation route, enabling rapid densification while preserving the microstructural features and dimensional integrity of the printed scaffolds. Surface engineering was further implemented through low-temperature gas nitriding to modify the mechanical response of the titanium filaments. The nitriding treatment increased filament stiffness and surface hardness while maintaining favorable cellular interactions. However, excessive nitride layer formation resulted in increased brittleness. The obtained results demonstrate that the combination of additive manufacturing, accelerated sintering, and controlled surface modification provides effective tools for tailoring the performance of porous titanium structures. The developed processing strategies enable independent control of architecture, microstructure, and surface properties, facilitating the optimization of mechanical reliability and biological performance. These findings contribute to the advancement of additively manufactured titanium biomaterials and provide design guidelines for the development of next-generation porous implants intended for long-term orthopedic and bone repair applications.
