SESSION C - BIOMATERIALS & ACTIVE SYSTEMS
Date: September 9, 2026
Near-equiatomic Nickel-Titanium (Nitinol, NiTi) smart alloys have established a critical role in biomedical engineering due to their unique mechanical characteristics and high biocompatibility. Compared to conventional metallic biomaterials such as titanium alloys and stainless steel, Nitinol offers two distinct functional advantages: the thermal shape memory effect and mechanical superelasticity. These mechanisms enable recoverable large-strain deformations, dynamic self-expansion, and constant-force actuation under physiological conditions, while its relatively low elastic modulus significantly mitigates stress shielding in load-bearing clinical environments.
Recent advancements in additive manufacturing (AM), particularly laser powder bed fusion (LPBF), have expanded the design space for NiTi beyond traditional wire- and tube-drawn geometries. Additive processing allows the fabrication of patient-specific, topologically optimized porous structures with tailored phase transformation kinetics and localized stiffness gradations.
This lecture addresses the current capabilities and metallurgical challenges of AM-processed Nitinol, detailing how precise control over process parameters and heat treatments preserves functional properties. Furthermore, we explore the integration of additive NiTi into active and responsive medical systems, highlighting novel implementations such as electrothermally triggered smart patches for controlled therapeutic delivery and adaptive wound monitoring. Finally, we summarize the broader clinical potential of additively manufactured Nitinol and outline future research directions for next-generation active, functional implants and bio-integrated devices.
The advanced austenitic stainless-steel Alloy 709 (Fe-20Cr-25Ni) is a promising candidate material for sodium-cooled fast reactors (SFRs) owing to its high-temperature creep strength and oxidation resistance. This study investigates the mechanical behaviour of Alloy 709 under strain-controlled low-cycle fatigue (LCF) loading, performed with and without strain dwell at 650 °C and 760 °C and at a strain rate of 1×10−3/s. The LCF tests with strain dwell were performed using either compressive or tensile strain dwell, with a dwell duration of 600 s. The results showed that the detrimental effect of strain dwell on fatigue life varied with temperature. At 650 °C, the tensile strain dwell tests exhibited roughly half the lifetime of both the continuous LCF tests and the compressive strain dwell tests. In contrast, at 760 °C, the lifetime under compressive strain dwell was slightly lower than that under tensile strain dwell, and both dwell types led to a decrease in lifetime compared with the continuous LCF tests. The results indicate that the introduction of dwell periods significantly influences the material degradation process. Subsequent microstructural and fractographic analyses of damage and crack initiation revealed that failure is primarily driven by a synergistic combination of phase precipitation, oxidation, dynamic recovery (DRV) and recrystallization (DRX) localized along the grain boundaries. This combined effect of environmental influence and microstructural evolution facilitates intergranular crack nucleation and accelerates the overall fracture of the alloy under severe high-temperature conditions.
This paper presents the analysis of the hot deformation behaviour of the Beta-C titanium alloy (Ti-3Al-8V-6Cr-4Mo-4Zr). Proper design of thermomechanical parameters and precise control of the microstructural evolution are essential for successful processing of these alloys. This research evaluates the deformation behavior of Ti-3Al-8V-6Cr-4Mo-4Zr alloy and discusses the importance of the processing parameters. Cylindrical compression specimens were machined from the alloy and subjected to hot compression tests in order to characterize the material behaviour under various thermomechanical conditions. Thermomechanical tests were carried out under uniaxial compression conditions within a temperature range of 800-1000 °C and at strain rates in the range of 0.01-10 s-1. Constitutive models were developed based on the obtained flow curves using the Hansel-Spittel equation. Moreover, the processing maps for the investigated alloy were developed, showing the most favourable conditions for the alloy processing. Basing of the performed investigations, the technological parameters of the alloy processing were selected and proposed for industrial forming of such alloys.
Alloying medium-carbon steel with copper increases the yield strength and ultimate tensile strength of the steel after tempering at 500°C, but results in a significant reduction of ductility and impact toughness [1]. Strain-assisted tempering (SAT) is expected to optimize the strength and ductility properties of these steels. In this study, the effect of SAT on the formation and kinetics of copper precipitation in 54SiCr6 medium carbon steel was investigated using electrical resistance measurements. The quenching temperature was 900 °C with a holding time of 20 min. Next, the samples were quenched in oil followed by tempering in an electrical furnace at temperatures of 510, 550 and 575 to 600 °C for 120 min. After tempering, controlled deformation by rotary swaging was carried out with a strain of 17% (strain rate is about 120 s−1).
The weight fraction of Cu precipitate was quantified by measuring the change in electrical resistance of the sample as a function of tempering temperature and time. The Johnson-Mehl-Avrami (JMA) equation was used to determine the activation energy (Q) for Cu precipitation and the JMA exponent (n). A decrease in Q from 284 kJ/mol for conventional annealing (CT) to 245 kJ/mol for SAT, and a slight increase in the JMA exponent n from 0.30 (CT) to 0.32 (SAT) were found.
The experimentally observed low values of the JMA exponent (n < 1) can be explained according to [1] by the fact that the exchange frequency between an atom and a vacancy strongly depends on their local environment, which implies a relatively large distribution of atomic jump frequencies.
The found values of Q are close to the activation energy of copper diffusion in ferrite 244 kJ/mol, and 222 kJ/mol, found for an iron alloy containing 1 wt.% copper tempered at temperatures from 450°C to 500°C.
The defect structure produced by the strain enhanced the diffusivities of both iron and copper, resulting in the accelerated copper precipitation and reduction of activation energy observed in this study.
References
[1] Salvetr, P.; Gokhman, A.; Svoboda, M.; Donik, C.; Podstranská, I.; Kotous, J.; Nový, Z. Materials 2023, 16, 2390.
[2] Soisson, F., Barbu A., Martin G. Acta Materialia, 1996, 44, 3789.
This study evaluates corrosion damage to prestressing steel strands removed from a prestressed concrete road bridge crossing the Elbe River in the Pardubice Region, Czech Republic. Strands exhibiting different degrees of corrosion damage were compared by visual assessment and tensile testing. Original fracture surfaces of wires damaged during service and the microstructure of corrosion-damaged wires were examined by scanning electron microscopy. Local corrosion products and deposits on the wire surfaces were analysed by EDS, while sampled bulk corrosion products were further characterized by XRF and XRD.
The damage was strongly localized and was associated with pitting corrosion caused by water ingress and the presence of chlorides. Increasing corrosion severity was accompanied by deterioration of the tensile response. SEM examination of the damaged wires revealed heterogeneous fracture morphology containing low-ductility regions and secondary cracking. The corrosion products consisted mainly of iron oxides and oxyhydroxides, including chloride-containing akaganeite, confirming long-term chloride-assisted corrosion. Local EDS analysis additionally documented the elemental composition of corrosion products and deposits directly on the affected wire surfaces.
Because the investigated material is a high-strength cold-drawn pearlitic steel exposed to sustained tensile stress and localized corrosion, a possible contribution of hydrogen-assisted degradation is also considered.
